Description

*Must specify DL count on chain loop ordered.

*Must specify DL count on chain loop ordered.

IF YOUR CUTTING JOB IS:

• Frozen
• Dry Cedar / Fir
• Heavy Going
• Dirty like bucking skid logs
• Creosoted

Carbide impregnated chain can cut it!


A custom "Carbitron" process electronically impregnates titanium-tungsten carbide into the surface of each cutting
tooth, leaving a very hard coating that will not chip, flake, crack, or become brittle. The two-thousandths thick carbide
coating can be sharpened with any good quality file or grinding wheel.

Extensive field testing has proven that Carbide Impregnated Chain will outlast standard chrome saw chain 5 to 10
times longer (depending upon cutting conditions). The stay sharp cutters reduce the necessity of filing to an absolute
minimum.


Available in 3/8" LP, .325", 3/8". Also available in .404 pitch on special order

WARNING! This product can expose you to chemical Nickel; which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.